The VentMaster fume extraction system by Orton Ceramics works by creating a small downdraft within the Kiln.

Kiln Venting System
Ventmaster Features

PLEASE NOTE WE ONLY SUPPLY FOR FITMENT TO WOODROW BRAND KILNS

The VentMaster fume extraction system by Orton Ceramics works by creating a small downdraft within the Kiln, the chamber is kept at a slight negative pressure.

Gases and Fumes are pulled out of the bottom of the Kiln, through a small hole, mixed with fresh room air and then exhausted to the outside through a 100mm duct.

Please be aware that other companies are now importing the fan but are not performing the upgrades for Australian conditions that Woodrow has developed.

We:

  • Powerdercoat the fan impeller (otherwise it won't last a year)
  • Replace screws with stainless as they tend to rust
  • Paint other exposed metal parts on the Fan
  • Includes a mounting bracket for the fan to the kiln model you have
  • And provide both the floor supports and alumina tube for bottom floor vent
  • Two hose clamps for the Duct exhaust
  • High Temp flexible tube to connect the Fan to your PVC duct

Please contact us we can go through how this system can work with your situation.

NOTE we can not assist you if you fit one of these Systems purchased from another vendor for fitment to a Woodrow Kiln.

Share Us On:

Address: 68 Bridge St, Picton NSW 2571, Australia

Also Available Through: